Bioactive compounds and physical attributes of Cornus mas genotypes through multivariate approaches
Demir, Bünyamin
Cornelian cherry fruits are quite rich in bioactive compounds. Natural colour, rich flavonoids and anthocyanins and high antioxidant activity have made the fruits a natural drug. In the present study, antioxidant activity, total flavonoids and total phenolics of naturally growing 18 cornelian cherry genotypes with different phenotypic characteristics were determined. Size and shape parameters of the genotypes were also determined with the image-processing method; sphericity, elongation and shape index were calculated and shapes of two-dimensional fruit images were compared with elliptic Fourier analysis. Antioxidant activity, total flavonoid contents and total phenolic amounts of the genotypes were varied between 55.062 and 152.420 mmol TE · kg−1, 286.40 and 2,882.80 mg QE · kg−1, and 2,64...
Morphological Characteristics of Grapevine Cultivars and Closed Contour Analysis with Elliptic Fourier Descriptors
Demir, Bünyamin
Morphology is the most visible and distinct character of plant organs and is accepted as one of the most important tools for plant biologists, plant breeders and growers. A number of methods based on plant morphology are applied to discriminate in particular close cultivars. In this study, image processing analysis was used on 20 grape cultivars (“Amasya beyazı“, “Antep karası“, “Bahçeli karası”, “Çavuş“, “Cevşen“, “Crimson“, “Dimrit“, “Erenköy beyazı“, “Hafızali“, “Karaşabi“, “Kırmızı“, “İzabella (Isabella) “, “Morşabi“, “Müşgüle“, “Nuniya“, “Royal“, “Sultani çekirdeksiz (Sultanina)“, “Yalova incisi“, “Yerli beyazv“, “Yuvarlak çekirdeksiz“) to classify them. According to image processing analysis, the longest and the greatest projected area values were observed in “Antep karası“ cultivar....
Physical characteristics of cherry (Prunus avium) varieties and shape analysis with the elliptic Fourier method
Demir, Bünyamin
Knowing the physical properties of biological products is of great importance in terms of developing harvesting technologies, innovating crop processing technologies and determining product drying properties. The aim of this study was to determine the dimensional and shape attributes of two different cherry types (‘10-5’ and ‘10-22’) and six different cherry varieties (‘Ferbolus Verdel’, ‘Lapins’, ‘Merton Late’, ‘Noir de Guben’, ‘Starks Gold’ and ‘Telegal’) and to put forth the differences and similarities of cherry varieties. For dimensional parameters, the greatest averages were observed in ‘10-22’ type and smallest averages were observed in ‘Telegal’ variety. Dimension properties of ‘Merton Late’, ‘Noir de Guben’ and ‘Starks Gold’ varieties were similar. ‘Telegal’ variety had the greate...
Biochemical composition and shape-dimensional traits of rosehip genotypes
Demir, Bünyamin | Alkaya, Günseli Bobuş
In the present study, the biochemical composition and shape and dimensional traits of 25 rosehip (Rosa canina) genotypes were investigated. The shape and dimensional traits were determined by image processing technique. Seed-propagated rosehip genotypes belonging to R. canina were collected from the natural flora of Mesudiye (Ordu) and Talas (Kayseri) districts. Antioxidant activity (39.510–72.673 mmol · kg−1), total flavonoids (287.80–1,686.20 mg quercetin equivalent (QE) · kg−1) and total phenolics (38,519.40–79,080.60 mg gallic acid equivalent · kg−1) of the genotypes exhibited large variations. Width (12.2 mm) and thickness (12.5 mm) of fruits averages were found to be close to each other. The genotypes exhibited fruit lengths between 12.0 mm and 29.5 mm. Average projected area at hori...
Shape Discrimination of Almond Cultivars by Elliptic Fourier Descriptors
Demir, Bünyamin
Knowledge is required about shape and size features of almonds before the design of machines, equipment and systems used in harvest and postharvest processes such as classifying, drying, packaging, grading, transportation and quality assessments of almonds. Such attributes are also required for assessing consumer preferences, cultivar registration, security of plant variety rights, investigating heritability and analyzing shape abnormalities. In present study, seven almond cultivars (‘Bertina’, ‘Ferragnes’, ‘Ferradual’, ‘Ferrostar’, ‘Glorieta’, ‘Lauranne’ and ‘Marta’) grown in Turkey were used in order to determine the longitudinal, surface and gravitational features and to compare their shapes with elliptic Fourier descriptors. ‘Bertina’, ‘Glorieta’ and ‘Ferragnes’ had the greatest longit...
Multivariate Analysis Approaches for Dimension and Shape Discrimination of Vitis vinifera Varieties
Demir, Bünyamin
In this study, berry dimensions and shape traits, which are important for the design of the grape processing system and the classification of 10 different grape varieties grown in same ecological conditions (‘Ata Sarısı’, ‘Barış’, ‘Dımışkı’, ‘Hatun Parmağı’, ‘Helvani’, ‘Horoz Karası’, ‘Hönüsü’, ‘İtalia’, ‘Mevlana Sarısı’, and ‘Red Globe’) were determined; differences between the varieties were identified with the use of discriminant analysis. The largest grape varieties were identified as ‘Ata Sarısı’ and ‘Red Globe’. The ‘Red Globe’ and ‘Helvani’ varieties had geometrically sphere-like shape. The ‘Barış’ variety had the lowest size averages. According to elliptic Fourier analysis, the primary source of shape variation was ellipse and sphere-looking varieties. However, shape variation was ...
Comparison of spray nozzles in terms of spr zzles in terms of spray coverage and dr age and drop distributionuniformity at low volume
Demir, Bünyamin
This study was conducted to compare the spray coverage rate and spray uniformity of seven different types of hydraulic nozzles (standard flat fan nozzles, ST; multirange nozzles, LU; air induction nozzles, IDK; twinjet air-induction nozzles, IDKT; narrow cone-angle standard nozzles, STD; hollow cone nozzles, DC; and antidrift nozzles, AD) commonly used in pesticide applications at low application volumes. All spray applications were carried out at a constant operating pressure of 300 kPa and a low application volume of 80 L/ha. The experiments were carried out in a closed facility under controlled conditions. Spray applications were carried out with the aid of a 12-m-long linear, automatic speed-controlled spray simulator. Water-sensitive paper was used for drop sampling. The greatest spra...
Determination of size and shape in the Moro blood orange and Valencia sweet orange cultivar and its mutants using image processing
Demir, Bünyamin
characteristics in designing relevant equipment, sorting, sizing and packaging systems. Therefore, the properties of size and shape of the sweet orange cultivar, 'Valencia', and its three mutants, 'A70', 'A77', and 'A88' were determined by image processing. The blood orange cultivar, 'Moro', was also included in this analysis. The volume of each cultivar and mutant was measured by the liquid displacement method. Linear equations with high R2 values were developed in order to estimate the surface area and geometric mean diameter, which were dependent upon the mass and volume of the orange samples. The results of this study showed that the 'A70' mutant differed from the other mutants and the 'Valencia' cultivar in regard t...
Elliptic Fourier based analysis and multivariate approaches for size and shape distinctions of walnut (Juglans regia L.) cultivars
Demir, Bünyamin
Size and shape data of agricultural crops provide great sources for food processing technologies. The physical attributes of different fruits should be known for the design, developing and innovation of food technologies. In this study, the size and shape distinctions of fifteen national and international walnut cultivars (Midland, Sütyemez-1, Serr, Maraş-18, Maraş-12, Sütyemez-2, Kaman-1, Kaman-5, Pedro, Howard, Chandler, Şebin, Şen-2, Bilecik and KR-1) were determined using elliptic Fourier and multivariate approaches. Firstly, the gravitational features of walnut cultivars were determined, and their dimensional, area and shape attributes were revealed by image processing. Cluster analysis was used to designate the walnut cultivars. Elliptic Fourier descriptors obtained from walnut out...
Effects of position angles in twin-jet spray applications on droplet penetration of hydraulic nozzles
Demir, Bünyamin
This study was conducted to determine the effects of different position angles in twin-jet spray applications on droplet penetration of different nozzle types. Seven different nozzle types (standard flat fan, ST; narrow flat fan, STN; multirange, LU; low-drift potential, AD; air-induction, IDK; twin-jet air-induction, IDKT) were used and nozzles were positioned +15° along the forward direction, perpendicular to ground surface 0? and reverse direction of forward -15°. Spray experiments at 100 L/ha constant application volume were conducted under controlled conditions of a closed facility. Water sensitive paper (WSP) was used as sampling surface. WSP samples were placed vertically and horizontally over both the metal frames and root collar of artificial plants. The present findings revealed ...