Objectives: The aim of this study was to investigate the effect of home bleaching agents on the color and translucency of resin composites. Methods: Thirty disc shaped specimens (1mm thick) were fabricated from each resin composite (Reflexions, Grandio, Gradia Direct, Clearfil Majesty Esthetic, Ceram-X Mono) and divided into 3 subgroups as carbamide peroxide (CP, Opalescence 10% PF), hydrogen peroxide (HP, 10% Opalescence Treswhite Supreme) and control group (n=10). Baseline CIE L*a*b* color coordinates were measured with spectrophotometer and translucency parameters (TP) were calculated. CP and HP groups were treated with bleaching agents according to manufacturers' instructions and control group was stored in distilled water (DW) for 14 days. Color and translucency measurements were...
Purpose: To evaluate the microshear bond strength of tri-calcium silicate-based materials to different restorative materials.
Materials and methods: Thirty-five disks of TheraCal LC and Biodentine were fabricated using teflon molds according to manufacturers' instructions. Then the specimens were randomly divided into 7 groups according to the materials applied: Fuji IX, Fuji II, Equia Fil, Vertise Flow, Filtek Bulk Fill Posterior Restorative, Filtek Z250 with Prime&Bond NT and with Clearfil SE Bond. All restorative materials were placed onto the disks using tygon tubes. Following a storage period, the specimens underwent microshear bond strength testing in a universal testing machine, and fracture modes were analyzed. Data were analyzed using one-way ANOVA and Tukey's post-ho...
Günümüzde
modern diş hekimliği kapsamında, diş dokularının maksimum oranda korunması ve
fonksiyon görmesi için minimal invaziv yöntemler uygulanmaktadır. G.V. Black
tarafından tanımlanmış olan geleneksel görüşe bağlı kalınarak uygulanan derin
dentin çürüğü tedavilerinde tüm çürük dokunun uzaklaştırılması, pulpanın
perforasyonuna dolayısıyla endodontik girişimlere ve bazı durumlarda çekime neden
olabilmektedir. Dişin ağızda kalma süresi, fonksiyonu ve prognozu açısından
önemli bir etken olan pulpanın vitalitesinin daha uzun süre korunabilmesi
amacıyla adeziv sistemler ve restoratif materyallerdeki yeni gelişmelerle
günümüzde pek çok yeni tedavi yaklaşımı ve materyal geliştirilmiştir. Bu
derlemede derin dentin çürüğü varlığında çürüğün uzaklaştırılmasındaki selektif
yaklaşımlar, k...
The purpose of this study was to evaluate the effect of Er,Cr:YSGG laser irradiation and/
or acid etching on the micro-shear bond strength (µSBS) of two different dual-cured resin
cements to human enamel. 24 intact, extracted molars were sectioned longitudinally and
randomly divided into three subgroups according to three surface pretreatment methods:
(1) Er,Cr:YSGG laser (Waterlase MD, Biolase) irradiation was used with a power setting of
2 W (55% water and 65% air), and a repetition rate of 20 Hz for 10s;
(2) 37% phosphoric acid application for 20s;
(3) Re-etching with phosphoric acid for 20s after the Er,Cr:YSGG laser irradiation as in group1.
12 enamel discs for each of the resin cements (Panavia F2.0 and Variolink N) were prepared
and three cylinders of resin cements were bon...
ün geçtikçe gelişen teknoloji, doğada meydana gelen olayların moleküler düzeyde incelenmesi için bilim dünyasına olanaklar sunmaktadır. Yirmi birinci yüzyıla girilmesiyle birlikte stratejik önemi bir o kadar daha artmış olan nanoteknoloji; materyallerin atomik veya moleküler düzeyde manipüle edilmesiyle mikroskopik aletler üretme sanatıdır. Nanoölçek düzeyde müdahaleyi mümkün kılan bu teknoloji; sağlıkta araştırma, koruma ve iyileştirme alanlarında insanlığın yeni bir atılım yapmasına katkı sunmaktadır.
Bilim ve teknolojideki bu gelişmeler diş hekimliğiyle ilişkili doku mühendisliğinde, implantolojide, protetik diş tedavisinde ve restoratif diş tedavisinde yaygın olarak kullanılmaktadır. Özellikle rezin bazlı kompozit teknolojisi restoratif diş hekimliğinde süren araştırmalar ve uygulan...
The aim of this study was to investigate the effect of hydrogen peroxide (HP) and carbamide peroxide (CP) on the surface roughness of five different composite resins using profilometer and scanning electron microscope (SEM). Thirty-six specimens (1 mm thick, 10 mm in diameter) of five composite resins were fabricated. Each composite group was equally divided into three subgroups as control, CP and HP. In control group, specimens were stored in daily refreshed distilled water during the 14-day testing period. In other groups, 10% HP (Opalescence Treswhite) and 10% CP (Opalescence PF) were applied and surface roughness values (Ra) of each specimen were measured with a profilometer at the end of 14 days. Additionally, SEM analysis was performed to evaluate the surface deformations of composit...
. 2015; 36(3): 128-131 | DOI: 10.5505/eudfd.2015.96720
Farklı Kompozit Rezinlerin Translusensi Özelliklerinin Karşılaştırılması
Esra Cengiz1, Sevcan Kurtulmuş Yılmaz2, Nuran Ulusoy1
1Yakın Doğu Üniversitesi, Diş Hekimliği Fakültesi, Restoratif Diş Tedavisi Anabilim Dalı, Lefkoşa, KKTC
2Yakın Doğu Üniversitesi, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Anabilim Dalı, Lefkoşa, KKTC
GİRİŞ ve AMAÇ: Çalışmamızın amacı, 5 farklı kompozit rezinin farklı renklerinin translusensi özelliklerini karşılaştırmaktır.
YÖNTEM ve GEREÇLER: Her kompozit rezinin (Grandio, Gradia Direct, Clearfil Majesty Esthetic, Ceram-X Mono, Filtek Z250) her rengi (A1,A2,A3) için 7 adet disk şeklinde örnek hazırlandı. Renk ölçüm işlemleri, D65 ampül ile aydınlatılmış bir renk ölçüm kutusu içinde spektrofotome...